Normas de Colaboración

Los trabajos enviados a esta publicación deben abordar temas de las Ciencias Pedagógicas.

Los artículos que se recepcionen para su posible publicación en la Revista serán trabajos de investigación (de maestrías, doctorados, proyectos, entre otras investigaciones científicas de necesidad para la educación). Se recibirán acompañados de un aval del Consejo Científico de su área: Facultad o Departamento de la Institución.

En los trabajos se admitirán hasta tres autores, en caso necesario. El autor principal, en representación del resto, firmará la DECLARACIÓN de originalidad y de ceder sus derechos a la Revista para la distribución y la difusión de los contenidos. Además, serán inéditos; no se deben entregar materiales que hayan sido publicados o se quieran publicar en otros órganos de prensa. Los trabajos se publican sin costo para los autores.

Todos los trabajos recibidos son sometidos a un proceso de evaluación (arbitraje), por pares, iguales en grados científicos y en especialidades y a doble ciegas (para autores y evaluadores), bajo el control del Consejo Editorial. Si el trabajo tiene sugerencias por parte de los evaluadores, se le devuelve al autor para que las tenga en consideración. En caso de discrepancia en las evaluaciones escritas, se somete a un tercer revisor, bajo las mismas condiciones. Posteriormente, el Consejo Editorial informa a los autores si su trabajo es rechazado, devuelto para modificaciones o aceptado para su publicación. En el caso de los devueltos para modificaciones, deben reintegrarse a la Revista en un plazo no mayor de 30 días para su reevaluación, con un documento en el cual consten los cambios efectuados u otras consideraciones.

Los trabajos enviados deben cumplir con las normas editoriales y los requisitos de presentación de esta publicación:

Se exige la entrega de un original y una copia del trabajo que se quiere publicar. Estos deben estar impresos en papel blanco (formato carta), por una sola cara, legible, a espacio y medio, con márgenes laterales de 2,5 cm, sin espacios entre párrafos y sin tachaduras. Se deberá utilizar la fuente tipográfica Times New Roman a 10 puntos. Todas las páginas estarán correctamente foliadas en orden consecutivo. La extensión máxima del trabajo será de 10 cuartillas en total.

En la primera página aparecerán el título del trabajo, autor (es): nombre (s) y apellidos (los nombres de los autores se escribirán completamente y los apellidos se enlazarán con un guión, ejemplo: Angelina Jacinta Roméu-Escobar), facultad de procedencia e institución, grado científico o título académico, categoría docente, categoría científica, ciudad, país. En los datos se incluirán los teléfonos del centro trabajo y los privados, además del correo electrónico del autor principal o del que vaya a recibir la correspondencia. En ninguno de los datos se emplearán abreviaturas.

La segunda página llevará el título del trabajo y, seguidamente, se escribirán las partes y los elementos que lo componen:

El resumen, con una extensión de 200 palabras, escritas en un solo párrafo, sin punto y aparte (párrafo americano); no se usarán siglas, abreviaturas ni citas bibliográficas, etcétera. El abstract debe corresponderse con el resumen y se utilizarán cuatro o cinco palabras clave en español e inglés (key words) para proporcionar la indización.

En la estructura que adopta esta publicación los trabajos científicos deben constar de Introducción, Desarrollo y Conclusiones:

En la Introducción no se emplearán citas y, al final, se deben declarar explícitamente los objetivos del trabajo. En el Desarrollo se dan datos, se fundamenta o argumenta, se apoya en citas u opiniones, etcétera, y es seguida por las Conclusiones de la investigación.

En el sistema de citación para citas, referencias y bibliografía, se tendrá en cuenta lo dispuesto por la Norma de Vancouver.

Las citas bibliográficas dentro del texto deben numerarse con un orden consecutivo. Se relacionarán al final del trabajo, en las Referencias, con el mismo orden que aparecen:

Ejemplo:

‘‘...ser culto es el único modo de ser libre...’’.23

REFERENCIAS

MARTÍ J. Obras Completas. T. VIII. La Habana, Cuba: Editorial de Ciencias Sociales; 1975. p. 289.

La bibliografía complementaria se colocará en una lista separada de las referencias (en Bibliografía).

Se ordenará alfabéticamente, según lo dispuesto por los Requisitos Uniformes (Norma de Vancouver). Ejemplo:

BIBLIOGRAFÍA

GÓMEZ J. Modelo de dirección de los recursos humanos para la profesionalización del desempeño profesional pedagógico de directivos y reservas de la Universidad de Ciencias Pedagógicas ‘‘Enrique José Varona’’. [Tesis en opción al Grado Científico de Doctor en Ciencias Pedagógicas]. La Habana, Cuba: Universidad de Ciencias Pedagógicas ‘‘Enrique José Varona’’; 2010.

Cuando una obra tenga más de seis autores, se pondrán estos y, seguidamente, la expresión et al. en cursiva.

Ejemplo:

GONZÁLEZ M A, CASTELLANOS D, CÓRDOVA M D, REBOLLAR M, MARTÍNEZ M, FERNÁNDEZ A M, ET AL. Psicología para educadores. La Habana, Cuba: Editorial Pueblo y Educación; 1995.

En los trabajos científicos para preparar correctamente, tanto las Referencias como la Bibliografía es necesario remitirse a la Norma de Vancouver y consultar los distintos formatos: artículos de revistas, publicaciones no periódicas, foros científicos, tesis en opción al grado científico, patentes, normas, leyes, regulaciones y otros documentos oficiales, publicación digital (CD ROM, DVD), artículos de revistas en Internet, monografía en Internet, página o sitio web, etcétera.

El término ‘‘figura’’ designa todo tipo de ilustración: fotografías, gráficos, dibujos, planos, mapas u otro tipo de ilustración incluida en un trabajo científico. Las citas o las referencias a las figuras en el texto se harán de la manera siguiente:

en singular: ... (Fig. 1),

en plural: ... (Figuras 1 y 2),

Se numerarán consecutivamente en el mismo orden en el que se citan en el texto, con número arábigo y el formato de sus pies será el siguiente:

Fig. 1. Metodología lúdico-creativa.

Las tablas se numerarán con números arábigos, en forma consecutiva. Las referencias de estas en el texto se harán de la manera siguiente:

en singular: ... (Tabla 1),

en plural: ... (Tablas 1 y 2),

El título se colocará en la parte superior de la tabla, de izquierda a derecha, en altas y bajas (letra inicial mayúscula), y los textos respectivos no se repetirán en el cuerpo del trabajo. Ejemplo de título:

Tabla 1. Modelo de predictores de adecuación de una estrategia pedagógica.

Se utilizará el Sistema Internacional de Unidades en los trabajos que lo requieran.

Se entregará una versión digital del trabajo escrito. Este documento debe ser elaborado mediante un procesador de texto (MicroSoft Word: versión 2003 o 2007), que agilizará el proceso de edición de la Revista.

Después que el trabajo se encuentre en imprenta no se aceptarán correcciones de ningún tipo.

El Consejo de Redacción se reserva el derecho de publicar o no los trabajos.

NORMS For the submission of articles

Articles sent to this publication should focus and deal with topics related to the Science of Education.

Articles received for their possible publication in the magazine should be research articles (master degrees, doctorates, projects, or other scientific research which are necessary to education). The articles will be received with a written letter of support from the Scientific Council of your faculty: faculty or department.

Articles written by multiple authors may reflect up three authors, if necessary, will be allowed. The main author of the article will sign the DECLARATION of originality and concede his rights to the magazine for the distribution and diffusion of its content. Also, the articles must be unpublished: no article previously published or that are waiting to be published by other editorials should be submitted. The articles are published without cost to the authors.

All articles received will be submitted to a process of evaluation (arbitration), by peers, of equal scientific degrees and fields of expertise and blindly (by authors and evaluators) under the control of the Editorial Council. If any of the reviewers should have suggestion the article will be returned to the author(s) for their review and consideration. In case of discrepancies in the written evaluation, the articles will be submitted to a third person under the same conditions as stated above. Afterwards, the Editorial Council will inform the author if the article has been rejected, returned for review and consideration, or accepted for publication. In the case that the article is returned for modifications and considerations it should be resent to the magazine in a period of no more than thirty (30) days for its reevaluation with an accompanying document which explains the changes made or other matters to be taken into consideration.

The articles submitted must comply with the editorial norms and the requisites of the presentation of this publication;

The article must be submitted must have an original and a copy of the article to be published, these must be printed on white paper (letter format), legible and one-sided paper, 1.5 space between lines, with lateral margins of 2.5 cm, without spaces between paragraphs or any type of cross outs. The typeface used must be Times New Roman 10. All pages must be correctly enumerated in their consecutive order. Articles of up to 10 pages in length will be accepted.

On the first page the title, author(s) full name should appear, example: Angelina Jacinta Roméu-Escobar), faculty or institution, scientific degree or academic designation, teaching category, city and country. The data should include any work or home phone, e-mail address of the main author or the designated author that will receive all correspondence. No data should be abbreviated.

On the second page please place the title of the article and the following:

The abstract of up to 200 hundred words in length, written in only one paragraph, without periods or others (American paragraph), you may not use acronyms, abbreviation or bibliography cites, etc. The abstract should be in correspondence with the Spanish equivalent and four (4) or five (5) key words should be highlighted.

In the article structure which is followed by this publication all scientific work submitted should have an Introduction, Body and Conclusion:

In the introduction should not include cites and its purpose should be clearly enunciated with the objective of the article. The body may include data, fundaments or arguments, and these can be supported by cites and/or opinions, etc., immediately followed by the conclusion of the article.

For cites, references and bibliography the author will adhere to the Norms of Vancouver.
All bibliography cites should be enumerated in consecutive order and will be in correletaiton with the references at the end of the article in the same order in which they appear:

Example:

“…being cultured is the only way of being free...’’.23

REFERENCES

MARTÍ J. Obras Completas. T. VIII. La Habana, Cuba: Editorial de Ciencias Sociales; 1975. p. 289.

Any complementary bibliography will be put in a separate list from the references page, this complementary bibliography page should be entitled (bibliography). It should be in alphabetical order and following all the requisites stated in the Vancouver Norms. Example:

BIBLIOGRAPHY

GÓMEZ J. Modelo de dirección de los recursos humanos para la profesionalización del desempeño profesional pedagógico de directivos y reservas de la Universidad de Ciencias Pedagógicas ‘‘Enrique José Varona’’. [Tesis en opción al Grado Científico de Doctor en Ciencias Pedagógicas]. La Habana, Cuba: Universidad de Ciencias Pedagógicas ‘‘Enrique José Varona’’; 2010.

When any bibliography cites has more than six (6) authors, these will be indicated by the expression, et al. in cursive.

Example:

GONZÁLEZ M A, CASTELLANOS D, CÓRDOVA M D, REBOLLAR M, MARTÍNEZ M, FERNÁNDEZ A M, ET AL. Psicología para educadores. La Habana, Cuba: Editorial Pueblo y Educación; 1995.

All scientific research should be submitted correctly, references such as bibliography should adhere to the Vancouver Norms and the author may consult different formats; magazine articles, non-periodical publications, scientific forums, scientific degree thesis, patents, norm, laws, regulations and other official documents, digital publications (CD ROM, DVD), internet magazine articles, monographic articles on the internet, websites, etc.

The terminology “figures” designates all types of illustrations, photographs, graphics, drawings, blueprints, maps, or any type of illustration included in the article. Cites and references with respect to the figures in the article should be submitted as follows:

singular: ... (Fig. 1),

plural: ... (Figures 1 y 2),

Said figures should be enumerated consecutively in the same order in which they appear in the article, with Arabic number and the format for the footnote should be as follows:

Fig. 1. Metodología lúdico-creativa.

All tables should be enumerated consecutively in the same order in which they appear in the article, with Arabic numbers and the format should be as follows:

singular: ... (Table 1),

plural: ... (Tables 1 and 2),

The title should be placed on the top of the table from left to right, (capitalizing the first letter) and the texts included in the tables should not be repeated in the body of the article.

Example of title:

Table 1. Prediction Models for the use of a pedagogical strategy.

The Internation Unit System should be used in all articles that so require.

A digital version of the article must be submitted. This document should be formatted in (Microsoft Word, 2003 or 2007 version), which will aid the magazine in its editorial process.

After the article has been sent to be printed there will be no corrections accepted.

The Editorial Council reserves the right to publish or reject any articles submitted.

Revista de Acceso Abierto