Normas de Colaboración
La
revista Tecnología, Ciencia y Educación del Instituto Mexicano de Ingenieros
Químicos (México) podrá aceptar para su publicación los siguientes tipos de mecanoscritos:
a)
Artículos técnicos. Deben abordar temas de interés práctico para los ingenieros
químicos, tales como procedimientos de cálculo, criterios de selección de
equipo, predicción de propiedades, técnicas de simulación y optimización u
optimación de procesos, instrumentación y control, etc. Su finalidad será
profundizar en los procedimientos y medios de que se dispone para solucionar
problemas en ingeniería química
b)
Investigación y desarrollo. Deben presentar aportaciones de estudios
experimentales y/o teóricos de investigación básica y/o aplicada o de
desarrollo tecnológico. Su objeto será difundir los avances de la ingeniería
química, de tal forma que resulten de interés para los profesionales de la
química
c)
Actualización profesional y educación. Presentarán los aspectos fundamentales
de la enseñanza en la ingeniería química en un área específica, de forma clara
y accesible. Su propósito será mantener actualizados, tanto a los profesionales
como a los académicos y estudiantes, así como proporcionar material didáctico
útil.
Los mecanoscritos deberán ser inéditos y contener material
original de interés para la ingeniería química. Los autores serán los únicos
responsables del contenido de los trabajos. En caso de ser aceptados y
publicados en la revista, los autores ceden de manera automática sus derechos
autorales para que la revista pueda publicarlos en formatos físicos y/o
electrónicos, incluido Internet. Una versión electrónica o tres copias legibles
ya sea en español o inglés deberán ser enviadas a:
Ruth
Pedroza-Islas, Directora de la revista
Lucila
Cecilia Méndez Chávez
Directora
adjunta de la revista
María del
Carmen Durán Domínguez
Comité
Editorial de la Revista Tecnología, Ciencia y Educación
Instituto
Mexicano de Ingenieros Químicos, A.C.
Laboratorio
de Ingeniería Química
Facultad
de Química de la UNAM
Paseo de
las Facultades s/n, Cd. Universitaria
04510
México D.F. o a las oficinas del IMIQ
Horacio
124-1101 y 1301, 11560 México D.F. MÉXICO
Tels.
(+0155 o +5255) 5250-4844 y 57, Fax 5545-5817 en el
IMIQ o
(0155 o +5255) 5622-3764 o a los correos-e:
mcduran@unam.mx,
lume_17@yahoo.com.mx
Los trabajos recibidos tendrán un número de
archivo, con el que serán enviados a revisión con, al menos dos árbitros que
pertenezcan a la especialidad del tema, designados por el Comité Editorial. La
evaluación es anónima (los árbitros no conocen a los autores y viceversa). La
aceptación de la contribución estará condicionada al dictamen de los árbitros. En caso de ser aceptada para su
publicación, el(los) autor(es) deberá(n) enviar el original en forma
electrónica en Word para Windows versión 2003 o anteriores (cualquier versión
excepto Vista o 2007 o 2010) y si lo desean grabado en un disco compacto. Si se
le pueden insertar en dicho texto las tablas y material gráfico, enviarlo ya
preparado. En caso contrario enviarlos en el programa en que estén capturados
indicando claramente el tipo de programa y versión empleados (ninguno de ellos
deben venir de los programas Vista o 2007 o 2010). El documento deberá seguir el
formato que se describe a continuación. El idioma oficial de la revista es el
español y deberá contar con un resumen en inglés y al menos tres palabras clave
para ser incluido en los índices internacionales, aunque también se aceptan
contribuciones en inglés, las cuales deberán contener el título, el resumen y
las palabras clave en español. En caso de no enviarlo electrónicamente debe
venir en hojas bond (papel tamaño carta 28 x 21 cm), ya completamente corregido
e incluyendo gráficas, dibujos y fotografías originales insertadas en el texto
donde se desee que aparezcan y con su rúbrica en cada hoja.
Título y autores
La
primera página deberá contener el título del trabajo, su traducción al inglés,
los nombres completos de los autores, sin grados ni títulos o como deseen que
aparezcan. Debe contener también el nombre y la dirección de la institución
donde se realizó el trabajo. Debe indicarse con un asterisco al autor a quien
debe dirigirse la correspondencia, con la dirección, teléfono, fax y correo electrónico
(si cuenta con él). Si se desea, en un pie de página se pueden indicar la o las
direcciones actuales de los autores. El título debe reflejar el objetivo
principal del trabajo en forma concisa. Utilice un título complementario sólo
cuando sea estrictamente necesario.
Resumen
La
segunda página debe contener un breve resumen del trabajo (un párrafo entre 100
y 300 palabras), que establezca claramente el objeto del trabajo y presente los
resultados y conclusiones más sobresalientes. Debe incluirse una versión del
resumen en inglés (de preferencia revisada por una persona con formación
técnico/científica cuya lengua materna sea el inglés). Se incorporarán entre
tres y cinco palabras clave en español e inglés que indiquen la temática de la
contribución.
Texto
El texto
comenzará en la tercera página. Deberá estar escrito en forma concisa y
coherente, utilizando enunciados cortos y simples en estilo impersonal y
evitando los detalles disponibles en libros, tesis, artículos previos o cualquier
material publicado de fácil acceso. El(los) autor(es) tiene(n) la libertad para
dividir el texto en secciones, las cuales pueden incluir introducción o
antecedentes, técnicas experimentales / teoría, procedimientos, resultados,
discusión y conclusiones. En la introducción se establecerá el objeto del
artículo, evitando una relación demasiado extensa de la literatura existente.
Las referencias a las ecuaciones, figuras y tablas deben hacerse por su número entre
paréntesis. Las ecuaciones incluirán su número entre paréntesis, a la derecha.
Los resultados se presentarán, de preferencia, en tablas o figuras, limitando
el texto exclusivamente al análisis e interpretación de las mismas. Como norma,
se evitará la presentación de tablas con datos que han sido incluidos en
figuras (o viceversa). Se limitará el número de tablas y figuras al mínimo
requerido para que el trabajo se entienda en forma clara y correcta. En caso de
incluir símbolos deben ser claramente identificados en el margen la primera vez
que se utilicen. La parte final del documento debe presentar de manera concisa
las conclusiones generales derivadas de la contribución presentada.
Nomenclatura
Al final
del texto, los símbolos usados en el texto y en las ecuaciones deberán ser
reunidos e identificados en una tabla de nomenclatura que se incluirá después
del texto entre las conclusiones y la bibliografía. Los caracteres romanos
deben listarse primero y, a continuación, los griegos. Los símbolos utilizados
serán los de uso común en ingeniería química y en el área específica del
artículo. Esta revista usa el PUNTO decimal.
Unidades
El
sistema de unidades que deberá emplearse es el Sistema Internacional (SI). Si
se desea, se pueden poner entre paréntesis los valores de otras unidades o
factores de conversión.
Figuras y
fotografías. Tablas
Las
figuras deberán ser elaboradas sobre papel blanco de buena calidad. Las líneas
deben dibujarse de forma precisa (si se usa un procesador computacional de
figuras usar una impresora láser o de eyección de tinta y si son electrónicas
evitar los colores ya que la publicación es en blanco y negro). Todas las
palabras y números que aparezcan en las figuras deberán estar impresos, sin
emplear máquina de escribir o símbolos manuscritos y con símbolos que en un
formato en blanco y negro no se confundan entre sí. Si se elaboran con medios
electrónicos deben tener la suficiente definición para no aparecer borrosas en
una impresión normal. Las fotografías, al ser impresas en blanco y negro,
deberán ser legibles. Debe tomarse en cuenta que, en caso de aceptarse el
trabajo para su publicación, serán intercaladas en el texto, donde correspondan
y que serán fotográficamente reproducidas de este original (y reducidas de
tamaño si se requiere). Si se entrega en papel, cada figura y fotografía debe
ser identificada por atrás con lápiz azul con la numeración correspondiente y
el apellido del primer autor. Cada tabla debe incluir como encabezado: Tabla 7.
Frecuencia ... (Pérez y col., 1989) o Tabla 9. Frecuencia ..., si son datos tomados de otro autor o si son
datos de este artículo, respectivamente.
Bibliografía
La
literatura citada en el texto o referencias a trabajos anteriores serán
señaladas en el texto en orden alfabético por el apellido del(os) autor(es) y
el año de publicación, separados por una coma y entre paréntesis. Si son más de
dos autores se pondrá y col., después del apellido del primer autor (P. ej.: Stoker y col., 1981).
En caso
de citarse varios trabajos simultáneamente, se separarán por punto y coma entre
cada cita (P. ej.; Pérez y col., 1989; Stoker y col.,
1981) por orden alfabético. En el caso de que el nombre del(os) autor(es) forme
parte de la redacción del escrito, únicamente se pondrá entre paréntesis el año
de publicación. La lista de referencias se insertará después de las
conclusiones, nomenclatura y agradecimientos, si es que estos existen y se hará
también por orden alfabético por autores, sin numeración y cuando se mencionen
varios artículos del mismo autor, estos se presentarán cronológicamente. Cada
una de las referencias contendrá los siguientes datos (para revistas
periódicas):
1. Nombre
del(os) autor(es), comenzando con el apellido paterno seguido de las iniciales
de los nombres (si se desea incluir el apellido materno éste deberá estar unido
por un guión al paterno).
2. Año de
la publicación.
3. Título
completo de la publicación (usando mayúsculas solamente cuando sea necesario
gramaticalmente).
4. Nombre
abreviado de la revista en que apareció (empleando las abreviaturas aceptadas
por los Abstracts) en negritas e itálicas.
5.
Volumen (en negritas e itálicas) seguido por el número (si hay) entre
paréntesis y, después de dos puntos las páginas de iniciación y conclusión del
artículo separadas por un guión. Ejemplo:
Hegg, D.A., Hobbs,
P.V. 1978. Oxidation of sulfur dioxide in aqueous systems with particular reference
to the atmosphere. Atmos. Environ. 12(3):241-253.
En el
caso de libros, el título debe ir en negritas e itálicas. Después, debe
indicarse la casa editorial. Posteriormente, la o las páginas que fueron
consultadas (P. 25, si fue solamente una o Pp. 237-242, si fueron varias).
Finalmente, la ciudad y país de edición, separados por una coma. Ejemplo: Stoker, M.S., Stone, R., Seager,
S.L. 1981. Química ambiental; contaminación del aire y del agua. Ed. Blume. P. 320. Barcelona, España.
Cuando se
trate de artículos dentro de volúmenes conmemorativos, memorias de simposia o congresos o libros en que colaboren varios
autores, se citará según el siguiente ejemplo. Underbrink, A.C.,
Sparrow, A.H. 1973. A radiobiological test system. En Chemical mutagens:
Principles and methods for their detection. A. Hollander, ed. Plenum Press. Vol. 3. Pp. 71-203. Nueva York,
EEUU. Si se citan tesis se seguirá el
siguiente ejemplo. López-Pérez, R. 1994. Uso de un programa computarizado para
determinar propiedades termodinámicas. Tesis profesional. UNAM, Facultad de
Química. México D.F. México. Si la cita es a una norma se pondrá la fuente, el
año, el título de la norma, la entidad que la emitió, la ciudad y el país de
edición. Ej.: DOF. 1994. Norma Oficial Mexicana NOM-112-SSA1-1994. Bienes y
servicios. Determinación de bacterias coliformes
totales. Técnica del número más probable. Diario Oficial de la Federación.
México D.F. Si la cita proviene de las redes internacionales se pondrá el autor
(si existe) o la palabra Anónimo, el año de la consulta y la “dirección” como
puede ser consultada: Anónimo, 2007. Presentación. Dirección electrónica (redes
internacionales): http://www.cneq.unam.mx/ambiental. Si viene de una revista
electrónica se pondrá el nombre del(os) autor(es) (si existe), el año, el
título de la contribución en negritas, el título de la revista en cursivas
seguido de las palabras entre paréntesis (en línea) y su número de ISSN, el
volumen y entre paréntesis el número, en paréntesis rectangulares la fecha de
consulta y, finalmente, la dirección electrónica: Méndez-Chávez, L.C. 2007.
Presentación. Tecnología Ciencia Educación (IMIQ) (en línea) ISSN 0186-6036. 22(1)
[Fecha de consulta: 25 de octubre de 2009]. Dirección electrónica.
http://redalyc.uaemex.mx/redalyc/src/inicio/ArtPdfRed.hjsp?¿Cue=48222101.
Material
complementario
Las
deducciones matemáticas, datos experimentales extensos, programas
computacionales y las partes del mecanoscrito de
menor importancia serán enviados por separado como material adicional. Este
material quedará depositado en la administración del IMIQ y en un pie de página
en el artículo publicado se darán las indicaciones necesarias para obtener una
copia de dicho material en caso de ser requerido. El material complementario
contendrá solamente información relevante que no sea incluida en la
publicación.
Sobretiros
Cada
autor recibirá libre de costo una copia de la revista donde sea publicada su
contribución. Si lo desea se le hará llegar el texto de su contribución en
formato electrónico .pdf como aparece publicado en el
ejemplar.
INSTRUCTIONS
FOR AUTHORS
The journal Tecnología, Ciencia
y Educación (Technology, Science, and Education) of
the Instituto Mexicano de Ingenieros Químicos, IMIQ
(Mexican Institute of Chemical Engineers, IMIQ) can accept for publication the following
type of contributions:
a) Technical Articles. They should give insights on practical subjects
for chemical engineers, such as calculations procedures, equipments
selection criteria, properties predictions, simulation and optimization
techniques, instrumentation and control, etc. Its goal should be the deep
knowledge of procedures and ways to solve problems confronted by chemical
engineers
b) Research and development. Experimental and theoretical novel
approaches for either basic or applied research or technological development can be presented. Its objective will be to show the advances
in chemical engineering of different subjects in such a way that they become
interesting for the chemical engineering professionals and researchers
c) Professional actualization and education. Fundamental aspects of
chemical engineering in a clear and accesible manner will be presented in order to maintain students,
professionals, and researchers actualized. Its purpose will to provide useful
teaching and didactic materials. Mechanoscripts
should be unedited and contain original and interesting material for chemical
engineers. Articles derived from refereed presentations in technical-scientific
presentations (congresses, seminars, etc.) are welcome. Authors will be the
solely responsible people for the contents of the contributions. In case the
contributions are accepted and published in this journal, in order to ensure
both the widest dissemination and protection of material published in this
journal, authors agree to transfer the rights of copyright in the articles they
contribute. This enables the journal to ensure protection against infringement.
The transfer of copyright is automatic at the moment
the authors accept the publication of their contributions either in physical
formats or electronically, included Internet.
An electronic version or three legible copies either
in Spanish or English should be sent to:
Ruth Pedroza-Islas, Director of the journal
Lucila Cecilia Méndez-Chávez,
Adjunct Director of the journal
María-del-Carmen
Durán-Domínguez
Editorial
Committee of Tecnología, Ciencia y Educación
Instituto
Mexicano de Ingenieros Químicos, A.C.
Horacio
124-1301, 11560 México D.F. MÉXICO
Tels. (+52) 55
5250-4844 and 57, Fax (+52) 55 5545-5817, or to the following
e-mail addresses: mcduran@servidor.unam.mx,
lume_17@yahoo.com.mx
Contributions received will be provided with a key file number, and sent to at least to
two experts in the subject for its evaluation. The evaluators
will be designated by the Editorial Committee. The evaluation is
anonymous (referees do not know authors and viceversa).
Contributions acceptance will be conditioned to these
examinations. In case the contribution is accepted for
publication, the author(s) should send THE LAST VERSION OF THE ORIGINAL PAPER
in electronic form (e-mail attachment or diskette using the processor Word for
Windows (any version except Vista or 2007). If tables and graphic material can be inserted in the text, authors should send it in such
a way. If this is not possible, they should be sent as
they were captured clearly indicating the program type and version employed.
The document should follow the format described below. The journal official
language is Spanish but it should include an English written abstract to be
included in the Chemical Abstracts. If the contribution is in English, it
should include a Spanish version of the title and of the abstract. In case the
authors decide not to send the contribution in an electronic file it should be printed in bond paper letter size (28 x 21 cm),
complete with the graphs, tables, and figures/original pictures inserted in the
text where they should be, and with the authors signature in each page.
Title and author(s)
First page should contain the contribution title in Spanish, its
translation into English, and the full names of the author(s) without degrees
or honorific titles, as authors wish to appear. If both parents
last names are to be included a hyphen should be added between them. It should
also contain the name and address of the institution where the contribution was carried out. An asterisk will indicate the author to
whom correspondence should be addressed, including
full postal address, phone and fax numbers, and e-mail. If desired the present
addresses of the author(s) can be indicated. The title
of the contribution should reflect the main objective in a concise form. The
use of complementary titles will be accepted only when
strictly necessary.
Abstract
The second page will contain the abstract of the contribution (between
100 and 300 words), that clearly establishes the objective, the results and the
conclusions obtained. It should be presented in
Spanish and English. It is strongly advised that a
language proficient person with a technical/scientific formation review the
abstracts in both languages. It should also include no more than five key words
that give a clear idea of the contribution contents (in Spanish and English)
for the subject searches.
Text
The text will start in the third page. It should be
written in a concise and coherent form, using simple short sentences
using impersonal style, and avoiding information available in books, thesis,
previous articles, or any other previously published material easily found. The
author(s) have the freedom to divide the text into sections, not numbered, that
may include an introduction, theoretical background, procedures and/or
experimental techniques, results and discussion, and the conclusions drawn. In
the introduction, the subject of the contribution will be
presented, avoiding a long review of existing literature. References to equations, figures, and tables should be done by its
number in parenthesis. Equations will include its number in parenthesis
in the right side of the text. Methodology should be precise enough for the
readers to be able to replicate the experimental work or the mathematical
development of the contribution. Results will be either
presented in tables or figures, limiting the text for its analysis and
interpretation. As a rule, it will be avoided to
present tables with data already included in figures (or vice versa). The
number of tables and figures will be kept to the minimum required for the
contribution to clearly understood. If it were
strictly necessary to include word processor symbols that made be confused,
they should be clearly identified in the margin the
first time they are used. The final part of the text should present in a
concise manner the general conclusions drawn from the contribution presented.
Nomenclature
Symbols used in the text and in the equations should be gathered and
identified in a table of nomenclature to be set after the text, between the
conclusions and the references. Authors may also identify them in the text if
they feel is necessary. Latin characters should be listed first, and then,
Greek ones. Symbols used will be those of common use in chemical engineering
and in the specific subject of the contribution. This journal uses the DECIMAL
POINT.
Units
Units system to be employed is the
International System (SI). If it is considered important, numerical values in other units or conversion factors may be added in
parenthesis.
Figures and photographs. Tables
For the paper version, figures should be presented
in separate sheets drawn with black ink in good quality white paper. If a
computer equipment is used, the printer should be of the laser type and with
high resolution. Letters and numbers should be printed.
Photographs in black and white will be printed in
glossy white paper. It should be considered once the contribution has been accepted that they should be inserted in its proper
place and that they will be reproduced from these originals and reduced if
required. Each figure and photograph should be identified
in the back with blue pencil using the corresponding numbering and the first
author’s last name. Figures will have its title in the bottom and with no final
point. Each table should have the title as a heading: Table 7. Frequency ... (Pérez
et al., 1989) or Table 9. Frequency ..., if they are data taken from other
author(s) or if these are data from this contribution, respectively, and with
no final point.
References
Cited references in the text should be signaled by alphabetical order of
the author(s) last name and the year of publication separated by a comma and in
parenthesis, and separating with ; each reference. If there are more than two
authors, et al. will be added to the first author last
name (Pérez, 1998; Ramírez and López,
2001; Stoker et al., 2006). In case the last name(s) is (are) part of the text,
only the year of publication will appear in parenthesis (… the experiments
carried out by Stoker et al. (2006) …). The list of references will be inserted
after the conclusions nomenclature, and acknowledgements, if these exist, and they will appear by authors last name in
alphabetical order without numbering. When there are several references of the
same author they will be presented chronologically,
with the newest reference appearing first. If two or more are from the same
year a letter a,b, etc.,
should be added to the year (Stoker et al., 2006a,b). Each reference will have
the following information. For periodical journals:
1. Last name of the author(s) followed by his/her/their initials (first,
second names). For Spanish speaking people wishing to include the mother’s full
last name or initial, a hyphen should be added between
both last names.
2. Year of publication.
3. Full title of the publication.
4. Abbreviated name of the journal according to the abstracts in bold
characters.
5. Volume (in italics and bold characters) followed by the number (if
there is any) in parenthesis and, after: the starting and ending pages numbers
separated by a hyphen. Example: Hegg, D.A. and Hobbs,
P.V. 1978. Oxidation of sulfur dioxide in aqueous systems with particular
reference to the atmosphere. Atmos. Environ., 12(3):241-253.
In the case of books, the title should be in bold and italic characters.
Afterwards, the editorial house should appear. Then, the page(s) consulted (P.
25, if it was only one or Pp. 237-242, if there were several of them). Finally,
the city and country of edition, separated by a comma. Example: Stoker, M.S.,
Stone, R., and Seager, S.L. 1981. Química ambiental; contaminacióndel aire y del agua. Ed. Blume. P. 320. Barcelona, Spain.
When the reference comes in commemorative volumes, proceedings from
symposia or congresses or they are chapters of books, they will
be cited as follows: Underbrink, A.C. and
Sparrow, A.H. 1973. A radiobiological test system. In Chemical mutagens:
Principles and methods for their detection. A. Hollander, ed. Plenum Press. Vol.
3. Pp. 71-203. New York, US.
If a thesis is cited, the following example is
given: López-Pérez, R. 1994. Uso de un programa computarizado para determinar propiedades termodinámicas.
Professional Thesis. UNAM, Facultad de Química. México D.F.
México.
If patents are cited, the title will be given,
then the number assigned to it, the city and country of registration, as
follows: Martínez, C. 1970. Procedimiento para cocer sorgo
por extrusión.
Registration: April 7. Pat.
No. 17253384. Dirección General de Invenciones y Marcas. Departamento de
Patentes. Secretaría de Patrimonio y Fomento Industrial. México D.F. México.
If the citation comes from internet, author(s) name (if it is given) or
the word Anonymous comes first, then consultation year, the title of the
document in bold characters, and then the “address” consulted: Anonymous. 2007.
Presentación. Electronic address (internet):
http://www.cneq.unam.mx/ambiental. If it comes from an electronic journal, the
name of the author(s), year, title of the contribution in bold characters,
journal title in italics followed by the words in parenthesis (on line) and the
ISSN number, the volume, and in parenthesis the number. In [ ], add the
consultation date, and finally, the electronic address: Méndez-Chávez, L. C.
2007. Presentación.
Tecnología, Ciencia, Educación (on line) ISSN
0186-6036. 22(1) [Consultation date: October 25, 2007]. Electronic
address: http://redalyc.uaemex.mx/redalyc/src/inicio/ArtPdfRed.jsp?iCve=48222101.
Supplementary Material
Mathematical deductions, profuse experimental data, computer programs,
and those parts of the mechanoscript of lesser
importance will be sent as separate additional
material. This material will be deposited with the IMIQ administration and a foot note in the printed contribution will indicate to those
readers interested in obtaining a copy of it, the instructions to get it. This
supplementary material will only contain relevant information that has not been
included in the publication.
Reprints
Each author will receive free of cost a copy of the journal number where
the contribution was published. The author may have a .pdf versión
of his/her contribution if requested.
Revista de Acceso Abierto