desde Redalyc
{{t.titulosHerramientas.nube}}
{{t.titulosHerramientas.numeros}}
X
{{t.formats.viewer}}
HTML
{{t.formats.mobile}}
ePUB
XML JATS
{{t.titulosSecciones.citas}}
{{t.titulosSecciones.autorias}}
{{t.titulosSecciones.descargas}}
{{t.titulosSecciones.revision}}
Abstract: This study aims to evaluate the use of silicon base (NS) and functionalized (NF) nanoparticles as emerging preventive surface treatment (ST) in reinforced concrete specimens. The specimens were fabricated with a water/cement (w/c) of 0.65 and subjected to a p
en es pt
Abstract: The impact of varying the dry paint film thickness (DFT) on the underpaint corrosion of steel plates obtained from the floor of an offshore oil platform is evaluated. The specimens were all prepared using the same material and paint scheme, and the DFT and ex
en pt es
Abstract: This paper presents the modeling and analysis of the corrosion effects due to carbonation on reinforced concrete elements through a numerical model based on the Finite Element Method. In order to minimize corrosion damage, tools are required to understand the
en pt es
Abstract: This work shows an analytical model for the design of corner combined footings subjected to an axial load and two orthogonal flexural moments per each column. It considers the real pressure on the ground below of the footing, and the methodology is based on t
en es pt
Abstract: This paper presents a case study about the challenges and good building practices involved in the execution of structural reinforced concrete pile caps over steel piles. The structural reinforcements were carried out in a project with 3 residential towers of
en pt es
Abstract: This document discusses the time range to optimize and understand infrared thermography results when used on damage detection for flexible pavement. A monitoring activity was performed during 14 continuous hours (5:00 a.m. to 7:00 p.m.) for four study areas i
en es pt
Abstract: The tests of Brazilian Standard NBR 15575: 2013 are part of the knowledge of the civil construction industry, but the heat and thermal shock test is innovative and does not have a consolidated history. The research objective is to analyze the testing critical
en pt es
Abstract: Faced with the large number of partial or total collapses in buildings, the objective of this study is the identification of the pathological manifestations and the risks of the supports for air conditioners of reinforced concrete in the buildings. The data w
en pt es
|
|
||
|---|---|---|
|
|
||
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} |  |
|
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} | |
|
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} | |
|
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} | |
|
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} | |
|