{{t.titulosHerramientas.nube}}

{{t.titulosHerramientas.numeros}}

Characterization of the urban heat island at Bucaramanga, Colombia, using real-time temperature monitoring

Abstract: One of the meteorological effects in cities is the increase in local temperature, which is known as urban heat island (UHI). The objective of this study was to detect and quantify the possible UHI in the city of Bucaramanga, Colombia. For this purpose, a real

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Analysis of the soiling effect on solar-panel power efficiency in the Colombian Caribbean region

Abstract: This paper summarizes the impact of soil/dirt in solar-panel performance in the Colombian Caribbean Region. The corresponding experiment compares the performance of two identical solar panels, which are subjected to different scenarios. The objective of this

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Simulation of Cr-III dispersion in the High Bogotá River Basin using the WASP model

Abstract: The Bogotá River is the major river in Cundinamarca and one of the main water streams in the city of Bogotá. Industries from different economic activities have been established around the river, especially tanneries. The current and traditional tanning proces

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
An integrated platform for smart energy management: The CC-SEM project

Abstract: Energy management focuses on improving the efficient use of resources and increasing energy access in a path towards a more sustainable society. In spite of the strategies that have been proposed to guarantee increased access to the energy resources at afford

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Design, construction, and evaluation of an energy harvesting prototype built with piezoelectric materials

Abstract: The piezoelectricity allows the generation of electric power taking advantage of the movement of vehicles and pedestrians. Many prototypes have been made with piezoelectric generators, but at present, their commercialization and use have not been popularized

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Calibration of NASGRO equation for mixed-mode loading using experimental and numerical data

Abstract: A procedure to calibrate the NASGRO equation in a high yield-strength steel under mixed-mode loading (I + II) is presented. The calibration consists in obtaining the material parameters known as C, m, p and q. The procedure is based on experimental and numeri

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
CFD simulation and validation of flow in small arteries to enable further drug delivery studies

Abstract: Treatments based on nanocarriers such as nanoparticles have emerged as alternatives to overcome common limitations and side effects caused by traditional treatments against cancer and neurological diseases. The main attribute of nanoparticles stems from the f

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Design of passive heat sinks to power semiconductor with the cesaro curve

Abstract: In the design of electronic circuits, stands out the power stage, which is responsible of increasing the signal characteristics, as current and voltage, for an appropriate performance of the device to fabricate. However, this stage is composed of elements lik

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Recirculating aquaculture system with three phase fluidized bed reactor: Carbon and nitrogen removal

Abstract: The core objective of the study was to evaluate the organic matter and nitrogen removal efficiency in a recirculating aquaculture system for the intensive laboratory-bred rainbow trout. The treatment system consisted of an upflow reactor (UR), a pre-filtratio

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Artificial wetland planted with Limonium Perezzi, for the treatment of wastewater from tanning

Abstract: The wastewater from leather tanning contains different types of pollutants depending on the internal process that is carried out, in particular, the riparian and tanning stages provide the greatest contaminant load within the process, in terms of organic matt

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}

Criterios de Evaluación
Criterios Básicos de Admisión Criterios Básicos de Admisión
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
Criterios Altamente Valorados / Criterios Deseables Criterios Cualitativos
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
Criterios Altamente Valorados Cuantitativos
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}