desde Redalyc
{{t.titulosHerramientas.nube}}
{{t.titulosHerramientas.numeros}}
X
{{t.formats.viewer}}
PDF
HTML
{{t.formats.mobile}}
ePUB
XML JATS
{{t.titulosSecciones.citas}}
{{t.titulosSecciones.autorias}}
{{t.titulosSecciones.descargas}}
{{t.titulosSecciones.revision}}
Abstract: This project assesses the risk of water supply failure for the agricultural sector under climate change conditions by implementing hydrological models that support decision-making for satisfying consumptive demands in times of scarcity. This project was devel
en es
Abstract: Classical deformation mechanisms based on crystalline defects of metallic polycrystals are not entirely suitable to describe the mechanical behavior of nanocrystalline and glassy materials. Their inherent complexity creates a real challenge to understand the
en es
Abstract: In this study, a novel experimental approach for the optimal selection of an actuator-based control strategy is presented. The proposed approach is a two-stage method: first, a two-level factorial experiment design with n factors (2n) was applied to compare d
en es
Abstract: The contamination of water bodies by heavy metals is a critical problem for human health and ecosystems, and it can bioaccumulate in organisms to toxic levels and even lead to the living being’s death. This research aimed to synthesize and characterize a biop
en es
Abstract: Landslides triggered by rainfall are one of the most frequent causes of disasters in tropical countries and mountainous terrains. Recent studies show an upsurge in landslide occurrence as an expected impact of human-induced climate change. This paper presents
en es
Abstract: This paper describes an analytical approach to conduct an analysis of beam-column elements with generalized end-boundary conditions on a homogeneous or non-homogeneous Pasternak elastic foundation. The mathematical formulation utilized herein is that presente
en es
Abstract: This study evaluates the water quality for human consumption in the municipalities of Sincerín and Gambote. It was measured through physico-chemical (color, turbidity, conductivity, pH, dissolved oxygen, hardness, and heavy metals) and microbiological (total
en es
Abstract: This work aims to develop technical solutions that allow providing the specified parameters of the accuracy of the shape of parts in the cross-section during processing on a CNC machine. Experimental studies were performed on a screw-cutting lathe. An acousti
en es
Abstract: A numerical fragmentation model is proposed to predict the mechanical response of intermingled, unidirectional hybrid composites under tensile loads. The model is based on a previously developed for unidirectional composites considering the critical number of
en es
Abstract: Nowadays, there are a lot of misinformation and myths related to both the deployment of antennas for 5G and the frequency bands used in such technology. Many of these myths arise from the lack of serious research documents released in common language to be un
en es
Abstract: This research work used Musa paradisiaca (banana) peels as a natural solvent, assorted with the precursor AgNO3 (10 mM) to perform the green synthesis of silver nanoparticles. The phytochemical components present in the Musa paradisiaca peel extracts were det
en es
Abstract: The presence of heavy metals in aqueous media represents a severe threat to ecosystems because they are non-biodegradable, toxic, and carcinogenic. In the present work, the utilization of agro-industrial residues from obtaining plantain starch for removing Ni
en es
Abstract: Human activity detection has evolved due to the advances and developments of machine learning techniques, which have enabled solutions to new challenges without ignoring prevalent difficulties that need to be addressed. One of the challenges is the learning m
en es
Abstract: Genistein (5,7,4′-trihydroxyisoflavone) is an isoflavone abundantly found in soy and other legumes and acts as a selective estrogen receptor modulator (SERM). When testing for similar abilities among other flavonoids, it has been found to be a strong topoisom
en es
Abstract: Footwear production is subject to the variability inherent in any process, and producers often need to apply tools that allow them to make the right decisions. This work documents the process to optimize the buffer allocation in a shoe manufacturing line mini
en es
|
|
||
|---|---|---|
|
|
||
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} |  |
|
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} | |
|
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} | |
|
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} | |
|
| {{criterio.prioridadCriterio}}. {{criterio.observaciones}} | |
|