{{t.titulosHerramientas.nube}}

{{t.titulosHerramientas.numeros}}

Analysis of diesel engine oils from 2.5L engine pick-up trucks by means of X-ray fluorescence

Abstract: Engine oil is one of the key elements to protect and to increase the life of the lubricated engine parts. However, it gets contaminated by external particles either in filtration or during combustion, which produces deterioration in some of the engine parts w

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Analytical performance evaluation of GFDM in underwater acoustic communication systems

Abstract: The rapid growth of the Internet of Things (IoT) has extended its concept to underwater environments. However, the implementation of these systems via wired communication still represents a technological challenge, mainly due to the high cost of their deploym

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Effect of the opening and location ratio on the performance of an H-Darrieus VAWT

Abstract: Vertical axis wind turbines such as Darrieus turbines are a very interesting category of low wind speed domestic wind turbines. Further research work is needed to enhance their efficiency to fulfill the higher demand in small applications for power generation

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Sustainability performance assessment of the transport sector in European countries

Abstract: The transport sector plays a fundamental role in the European Union economy and its efficiency is fundamental to strengthen the region’s environmental and economic performance. Unfortunately, the sector still remains heavily dependent on oil resources and is

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Design and simulation of mechanical press for testing of coining tools with nanostructured coatings

Abstract: The present study proposes the design, simulation, and finite element analysis (FEA) of a mechanical press to test coining tools that contain nanostructured coatings. The designed mechanical testing press has a nominal force capacity of 800 kN with a ram stro

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Control surface design for radio-controlled aircraft. Case: SAE aero design micro-class prototype

Abstract: This research article presents a design methodology for primary control surfaces (Ailerons, Rudder and Elevator) for experimental unmanned radio-controlled aircraft. The methodology is based on the proposal and standardization of the required mechanical and a

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
A review of airflow rate estimation techniques for natural ventilation in buildings

Abstract: As natural ventilation involves local and global interactions, the estimation of these interactions can be performed by many approaches. Such approaches, rather more experimental and numerical than analytical, often require a great deal of instrumentation and

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Three-Bar structure optimality criterion using the linear resizing rule

Abstract: The static analysis of the indeterminate three-bar structure is developed using the Castigliano’s first theorem, taking the lengths and inclination angles as variables. Some reductions are applied in the resulting set of Equations to approximate them to the r

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Small wind turbines study and integration in a peri-urban microgrid

Abstract: The use of wind resources has always gone hand in hand with high wind speeds in open fields. This paper develops the decisions to be taken for the selection, installation, and connection of small wind turbines in peri-urban environments, where wind speeds are

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Separation of carvone by batch distillation from the mixture obtained from limonene oxidation

Abstract: Limonene is the main constituent of citrus oils whose oxidation produces a set of fine chemical compounds such as carvone, carveol, and limonene 1,2-epoxide. This contribution reports the results of the experimental evaluation and computational simulation of

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Electric power management in a microgrid analyzing photovoltaic arrays and a turbine-generator system

Abstract: One of the priority objectives of microgrids is to achieve energy self-sufficiency, generally resorting to distributed generation sources and backup systems; however, they are usually connected to conventional electrical networks that ensure supply to the loa

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Hidroituango intake gate closure - Emergency conditions

Abstract: This article presents the investigation, analysis, and results of the intake gate closure of two vertical fixed-wheel gates at the hydroelectric project Ituango in Colombia (2400 MW) under free- flow conditions. This atypical operation was considered successf

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Renewable energy in sustainable supply chain: A review

Abstract: In the search for sustainable processes and products, eco-friendly policies have been developed over the years, aiming to reduce the environmental impacts as a step toward sustainability. Among the environmental impacts, alternatives to mitigate the greenhous

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Association between particulate matter and respiratory symptoms in students in the municipality of Guachetá, Colombia

Abstract: The purpose of this article was to establish the association between exposure to particulate matter and respiratory symptoms evaluated in students who remain in schools at the municipality of Guachetá (Colombia). This is a cross-sectional study conducted on c

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Optimization of water reservoir volume in an urban water supply system

Abstract: In this paper, the water pumping regime, as well as the water consumption regime with regard to the required quantities and the example of water consumption, with an emphasis on changes in water volume, are examined. This aims to show the functioning of the r

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}

Criterios de Evaluación
Criterios Básicos de Admisión Criterios Básicos de Admisión
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
Criterios Altamente Valorados / Criterios Deseables Criterios Cualitativos
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
Criterios Altamente Valorados Cuantitativos
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}