Abstract: Freshly-felled Chinese fir (Cunninghamia lanceolate), Masson Pine (Pinus massoniana) and Camphor Tree (Cinnamomum camphora) logs were reconstituted to form laminated lumber with moisture content above fiber saturation point by slicing, finger-jointing, gluing

en

Abstract: Wooden hollow-core briquettes made of wooden waste represent an important category of wood-based combustible materials used in heating chambers. This paper aims to determine some of the characteristics of these briquettes made of spruce and oak waste. The com

en

Abstract: Physical and mechanical properties were evaluated on cross-laminated panels (plywood) fabricated with three plantation species (Cordia alliodora, Gmelina arborea and Vochysia ferruginea) from tropical climates in Costa Rica. The panels were glued with urea-fo

en

Abstract: The paper presents the results of investigations performed in the peripheral milling of oak wood (Quercus robur), where the impact of cutting regime elements and tool geometry on the cutting force is analyzed. A large-scale experiment was conducted to impleme

en

Abstract: Meticulous chemical analysis of decaying xylem and linking it to corresponding anatomical modification at the cellular level can improve our understanding of the decay process. The aim of this study was to monitor the histological, chemical, photochemical, an

en

Abstract: We examined the compatibility between the visual strength grading and the mechanical properties determined by using nondestructive and destructive test methods in Turkish Black Pine structural timbers. Fifty three structural timber were graded with three diff

en

Abstract: There is still a need to improve the production sequences of micro fibrillated and nano fibrillated celluloses to obtain more economic and better quality products. The aim of this study was to improve the production efficiency and quality of micro fibrillated

en

Abstract: Treated wooden utility poles, from trees such as eucalypts, are the most commonly used for telephone and electricity transmission lines in Uganda. In the last decade, however, frequent failure of wooden poles in service has been reported, likely due to the pr

en

Abstract: Colour can be one of the preferencial factors prior to making a decision when people want to make a purchase of a wood product. Impregnation treatment can alter the wood colour. This study investigated the colour change of young plantation Jabon wood due to i

en

Resumen: Utilizando el test de impacto, basado en la norma ASTM D1037-99, se compara la resistencia de diversas composiciones de fabricación de parquet multicapa de Eucalyptus globulus y Quercus robur, con distintos espesores de capa noble y utilizando para cada uno d

Abstract: The resistance of several Eucalyptus globulus and Quercus robur engineered wood flooring compositions has been tested using the impact test, according to the ASTM D1037-99 standard. The test samples were made up of different top layer, top layer thicknesses a

es en

Abstract: Combined hygro-thermo-mechanical technique was adopted and used for densification of poplar wood instead of sole treatment. This technique is combination of two techniques of hygrothermal treatment and densification of wood. For treatment, poplar wood blocks

en

Abstract: Turkish hazel (Corylus colurna) lumber with a nominal thickness of 5 cm from the Kastamonu region, Turkey, was dried through conventional kiln drying using two different programs, a non-protective drying schedule and a protective drying schedule. The goal of

en